- Before charging, be sure to fully read and understand the information pertaining to the LiPo battery charger in use. All charger safety guidelines must be followed when using Pulse Ultra batteries.

- Always use a dedicated LiPo based charger that has the ability to properly monitor and balance the battery cells.

- Never charge any Pulse Ultra battery inside a home, residence, vehicle, or garage. Always charge in a safe, open, non flammable environment.

- Never charge Pulse Ultra batteries inside the model.

- Never leave batteries alone while being charged. The end user must always be present when batteries are charging to prevent any battery problems during the charging phase.

- Never charge LiPo batteries when they are hot to the touch, just after use. Also use caution when handling hot batteries after usage, as LiPo batteries will heat up during the discharge phase.

- Always obey the proper amperage rates pertaining to the noted Pulse Ultra battery that is being used. Charging at a higher amperage rate than noted can cause battery failures, which can result in fire.

- Always check the individual cell voltage before & after usage to determine if any anomalies are present, and to also avoid over discharging the batteries in use.

- Never over charge or over discharge a LiPo battery, as this can result in cell damage, battery failure or fire. Maximum cell voltage is 4.20V for all Pulse Ultra batteries.